Overall Size: 2055 mm L X 900 mm W X 560 mm H (Approx.)
Suitable for Mattress Size: 1980 mm L X 890 mm W (Approx.)
Bed frame is made up of 60 mm x 30 mm x 18G CRCA rectangular tube
Four- flush I.V. Rod locations with Nylon inserts to avoid rusting
Four sections top is made up of 18G CRCA sheet double press bend on four sides and
Uniformly perforated holes 23 mm diameter
Backrest and leg end section is welded to 25.4 mm diameter x 16G CRCA pipe,
Fix section is made up of 18G CRCA sheet and 25 mm X 5 mm M. S. Flat welded to main frame.
Backrest and knee section can be adjusted by two separate screw mechanism with folding handle non detachable in SS.
Legs are made from 38 mm x38 mm x 18gauge ERW tube with horizontal tube 25.4 x 25.4 x 18 swg tube.
The end of the legs that fits to the bed welded to a 150 mm long at least 3 mm thick section.
Legs are Provided with four no’s non rusting 125 mm dia casters made high strength engineering plastic with, diagonal locking
The Head and Leg end Bow is made by good quality polymer material and the molded panels are easily removable.
Internally Supported by 60 x 40 mm ERW tube
Detachable Under side shelf at least 220 mm wide to be provided under for keeping patient belongings. To bed the bed made form 19 mm dia round ERW tube with wire mesh welded to it.
Detachable waste basket at least 300 dia approx fitted on a revolving ring made form 12 mm dia which can be installed to either side of the bed is at least 150 mm clear from the ground
Aluminium extruded rails 1480 mm long with anodizing with six vertical poles which can be operated by lever provided at the end
100 mm thick mattress with sections as per the bed with Rexene cover in pre approved color