Pawar Electro Systems Pvt. Ltd.

an ISO 9001:2008 Company
JOVE World | Sitemap

Trauma Care Medicin Trolley

Plain Bed


Semi Fowler Bed


Fowler Bed


ICU Bed (5 Function) Manual


ICU Bed (Fully Motorized) With 4 PC


Delivery Bed (Motorized)


Delivery Table (Telescopic)


Stretcher on Trolley (SS)


Over Bed Table - Push Type


Bed Side Locker (With Membrane Top)


Bed Side Locker With Over Bed Table (Membrane Top)


Saline Stand Complete ss


Saline Stand Powder Coated


Dressing Trolley ss Complete


Dressing Trolley Mayo Table ss Complete


Trauma Care Medicin Trolley


Revolvind Stool (ss) With Cushion Top


Instrument Trolleys Big ss Complete


Instrument Trolleys Small ss Complete


Instrument Trolleys Medium With 2 Shelf Complete ss


Instrument Trolleys Medium With 1 Shelf Complete ss


Overall Size: 660 mm x485 mm x1625 mm ht

Tubular frame made from 25.4 x 25.4x 18 swg ERW Tube

Five drawers with internal compartments at least 30 per drawer formed with partitions from 5mm thick soft board easily detachable, for first 4 drawers

First two drawers 70 mm third and fourth drawer 100 mm and the fifth drawer at least 295 mm

All drawers mounted on heavy duty telescopic channels

2 lines of flip out bins with transparent front to see the content inside with provision for labeling each line to be at least 600 mm l x 140 mm d

4 no’s 100 mm non rusting revolving castors 2 with brake and 2 without brake

Handle on the left to move the trolley

Telescopic writing pad under the Stainless steel top,

Top in S.S 1mm thick press bent on three sides with raised edges by at least 50 mm to act as railing

Stainless file container on the right side of the trolley

2 waste carrying bins in plastics on the left side of the trolley

Cylinder cage on the back side of the trolley which can slide below when not in use

Telescopic IV attachment on left side of the trolley

Monitor try on the top at least 150 mm deep

Finish: All components should be pretreated in separate eight tank process for better finish, good adhesion and corrosion protection. Process includes Hot Degreasing, De rusting, Activation, Phosphating & Number of Water rinses as per IS 3618 - 1966 class ‘C’ type The pretreated material is coated with epoxy polyester powder with film thickness of 60 microns (approx.) and then oven baked at 180 degree centigrade

CE certified.